Ask Experts Questions for FREE Help !
Ask
    holdn2aces's Avatar
    holdn2aces Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 14, 2010, 09:07 AM
    Can CEL be checked without OBD II Tester?
    2002 Sequoia Check Engine light on. Can codes be checked by jumping Te1 & E1 as in older model Toyota's.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jun 14, 2010, 09:18 AM

    You'll need a code reader or scan tool.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cel light does not come on [ 2 Answers ]

Hi I have a honda accord 2001 auto. I have problems starting and also the car randomly stalls. I am aware that the inertia switch is missing and that the cables have been bypassed. The car does not start when the CEL light and green key light does not come on. They lights always appear and...

Can a P1615 OBD code cause a P0335 OBD code [ 1 Answers ]

2004 Maxima won't start after battery was disconnected for 5 days while tranny was being replaced. Turns over fine and dies. I get a P1615 NATS Malfunction code (security system issue) and a P0335 Crankshift sensor circuit problem. Is the 1615 issue causing the P0335 issue or does the crankshaft...

98 Civic No Spark CEL on [ 8 Answers ]

The CEL stays on after two seconds. The fuel pump runs, but no spark, and the fuel pump stays on(doesn't shut off after two seconds) I've checked all fuses, none are blown. I have three distributors I've tried, three ecus, three main relays, two map sensors, and two ignition switches. I can get...


View more questions Search