 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Increase output rpm of an electric motor
Hello, I'm creating a wind turbine at home using a permanent magnet motor. 1hp 120v d.c 9amps. 2700rpm 5/8" shaft I calculated the torque to be ~96 in.lbs therefore I need this motor turning almost resistance free. I am trying to calculate how to do this using pullys but don't have the info as to sizing using multiple pullys. I am assuming a wind imput to turn my first pully (whatever size it shall be) to be ~50rpm. From there on I don't care how many pullys I must use.
|
||||
Check out some similar questions!
Hello does anyone know if it is practical or even possible to amplify the power of a small generator using a large watt inverter? Say you have a 2 or 3 HP 1000 watt generator and you hook it up to a 5000 watt inverter. What kind of power will you be NOW able to generate? Doesn't the horse power of...
If the drive sprocket has a diameter of 4.2 inches, the driven sprocket connected to the gear box has a diameter of 8.7 inches, and the gear box itself has a gear ratio of 50:1. What is the output RPM if the motor is running at 1000 RPM?
How do I increase 2.2kva generator output and can I use electric motor on generators instead of petrol motors
:eek:Hi, I am wanting to be able to reduce RPM of metal cut off drop saw motor from 4000 rpm to 2000 rpm approximitly. Thanks if you can help.
Can the heat output of a furnace be increased safely by using a bigger gas valve or burner orifices and increasing the blower speed?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
