Ask Experts Questions for FREE Help !
Ask
    davidv43's Avatar
    davidv43 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 9, 2010, 05:23 PM
    rudd to honeywell thermostat
    I am replacing my Rudd thermostat which has a White (E), Red (R), Green (G), Yellow(Y) Blue (B) and brown (X) wires coming from the wall. I am replacing it with a Honeywell RTH2410 thermostat which has O/B, Y, R, G and W/AUX connectors. The Y, R, W and G connections are easy. But what happens to the blue and brown wires?

    Thank you!
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Jun 9, 2010, 05:41 PM

    Blue to o, brown to L or not used.
    davidv43's Avatar
    davidv43 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 9, 2010, 05:58 PM

    Thank you!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rudd thermostat to Honeywell [ 1 Answers ]

I have a Rudd Thermostat with the following wires and connected to the poles below green, red, Blue, yellow, white, brown G R B Y W2 X x has a jumper to E my new Honeywell thermostat has the following poles Rh Rc W Y G can anyone help me...

Changing from a Rudd to a Hunter thermostAT [ 1 Answers ]

I bought a hunter 44360 digital thermostat to replace a Rudd. The Rudd was wired Y-Yellow, G-green, E-White, R- Red, B-Blue, and a brown on X. The Hunter has G, RC, RH, Y/O, W/B and Y1. I can't seem to get the outside fan to run. Also before changing the thermostat, the blower fan constantly...

Changing from a Rudd to a Hunter thermostAT [ 2 Answers ]

I bought a hunter 44360 digital thermostat to replace a Rudd. The Rudd was wired Y-Yellow, G-green, E-White, R- Red, B-Blue, and a brown on X. The Hunter has G, RC, RH, Y/O, W/B and Y1. I can't seem to get the outside fan to run. Also before changing the thermostat, the blower fan constantly...

Changing from Rudd to Honeywell Thermostat [ 2 Answers ]

I am trying to change from a Rudd thermostat and system to a Honeywell RTH 7500 Thermostat. Having problems with the wiring as it does not work properly. The system that I have is a heat pump in the attic with auxiliary heat and an air conditioning system outside. I am not sure if this should be...

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search