 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Remedy for slab deflection
We have PT slab, constructed after jumpform work i.e. couplers and pull out bars provision were first left into core walls at the time of wall casting and later slab was casted with necessary PT reo. Span about 6.4m in short direction and 12m in long direction. Could you please explain the reasons for its defections and possible solutions. Slab has already deflected by 10mm in one years time with out actual finishes and LL on it.
|
||||
|
||||
|
We have PT slab, constructed after jumpform work i.e. couplers and pull out bars provision were first left into core walls at the time of wall casting and later slab was casted with necessary PT reo. Span about 6.4m in short direction and 12m in long direction. Could you please explain the reasons for its defections and possible solutions. Slab has already deflected by 10mm in one years time with out actual finishes and LL on it. |
||||
|
||||
|
We have PT slab, constructed after jumpform work i.e. couplers and pull out bars provision were first left into core walls at the time of wall casting and later slab was casted with necessary PT reo. Span about 6.4m in short direction and 12m in long direction. Could you please explain the reasons for its defections and possible solutions. Slab has already deflected by 10mm in one years time with out actual finishes and LL on it.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm really confused about how to handle my cracked slab foundation. Over a 10(?) foot span, the room corner drops 1.5" compared to the height at the center of the room. Other cracks spider out in different directions. I've been thinking about this problem for over a year. One book on the subject...
Can anyone derive the formula for calculating the deflection of beams?
Where can I find a chart that will show how much a steel I beam will deflect under a given load? I am building a 5 ton crane and need to size the beam that holds the hoist. Minimum size is 5 inch flange, maximum is 6 inch and the vertical dimension can be 10 or 12 inch. It is to be 48 feet long,...
Hi, I'm a Mech Eng by education, but haven't used many of the skills for a long while. Can someone please run through the equations for calculating bending moment, stress, and deflection of a simply-supported beam? Maybe, for example, using a 2x10 (1.5" x 9.25" wood floor joist?? )... As I...
View more questions Search
|
