Ask Experts Questions for FREE Help !
Ask
    deborahanna's Avatar
    deborahanna Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 7, 2010, 07:32 PM
    Have older model Heil HVAC the fan blower works on heat but not on cool .
    We have tried everything .Cleaned the coils on the outside unit , changed the thermostat and still the inside fan does not blow on cool but it works perfectly fine on heat .We also tried fan only and that didn't work either .
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #2

    Jun 7, 2010, 07:40 PM

    It's the contactor switch. Needs replaced. Same thing happened to me.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HVAC Split Unit Heat works fine, A/C compressor on fan off [ 10 Answers ]

Hello all. I certainly have found a TON of info on this site, and problems that sound just like mine, but solutions seem to point to different things than in my system. So I apologize in advance if this is a duplicate somebody already answered. I have an older Ducane Oil Furnace converted to...

Blower will only work in Heat, not Fan-On or Cool-Auto [ 3 Answers ]

Hi, I have a York system about 10 years. Its control board keep giving me problem. Most last year was the connection problem of the socket where the t-stat's 4 wires go in. I finally soldered a fly-wire for the W for heating issue last winter to fix it. Now, the summer comes and the cooling is...

Blower works on A/C but not on heat or fan only [ 1 Answers ]

I have a 1997ish intertherm A/C unit, when the Air is on the blower works fine, but when I switch to heat or fan only the blower will not work? I have bought a new blower relay & capacitors. I tested the sequencers for 240 & 24 volt, everything is reading good. I am at a loss, does anyone have...

Fan Blower doesn't come on in Fan,heat or cool [ 2 Answers ]

Yesterday I turned on my heat(coil in air handler) and everything worked fine. Last night I turned it on again and the fan wouldn't come on no matter where the switch was: fan only, heat or air. I made the appropriate temp changes for heat/air. There is a humming noise coming from the heating coil...

Blower fan works in A/C but not heat [ 8 Answers ]

A couple of weeks ago my Lennox G20Q3E-75-1 was acting up. Gas valve was cycling when calling for heat and then once satisfied and the main burners went out the pilot light was staying lit. I thought it might be the flame sensor as far as the gas valve cycling and didn't want to tear into it so I...


View more questions Search