Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting Copper Supply Lines to Brass Supply Lines
[ 3 Answers ]
I have just started remodeling my kitchen and am looking to move my kitchen sink further down the wall. The kitchen is completely gutted at this point. The supply lines in my house are all brass. I'm looking to stem off the brass lines using copper tubing. Is it possible to cut the brass supply...
Re wiring existing jacks switching lines
[ 1 Answers ]
I have two separate lines coming into my house. One line operates from two phone jacks and the other operates from two phone jacks. I need to switch one line with the other on two different jacks. The jacks are not the same as each other. How can I re-wire them from one line to the other.
Connecting new laptop to existing wireless router
[ 1 Answers ]
Currently have PC which operates via Belkin Wireless Router with no problems. Have just purchased a wireless laptop but I am having problems connecting to Internet.Laptop shows wireless signal strong but only limited connectivity. I really don't know what I should have done in order to ensure...
Connecting power into existing meter.
[ 1 Answers ]
I have built a new garage about sixty feet from the house. I installed a new 200amp panel and roughed in all my wiring. The inspector told me I could not connect to the bottom of the meter to run power to the garage. He said I could use a meter base with breaker panel attached ,and connect the...
New bath on slab (tie into existing lines)
[ 3 Answers ]
I plan on adding another bath into an apartment I have attached to a hangar building. It has an existing septic system with a kitchen / bath and laundry on it now. I want to add a shower, toilet and lav to the new bath. This needs to function well, but there is no permit or inspection... View more questions Search
|