Ask Experts Questions for FREE Help !
Ask
    kbuchholtz's Avatar
    kbuchholtz Posts: 110, Reputation: 2
    Junior Member
     
    #1

    Jun 6, 2010, 07:00 AM
    Middle outlet in 3-gang not working
    I have a 3-gang box in my kitchen with one paddle switch and two outlets. Worked fine for 3+ years. All of a sudden the middle outlet is not working. No problems with the switch or the other outlet.

    What might cause this problem, and will simply switching out the middle outlet solve the problem, perhaps?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jun 6, 2010, 07:07 AM

    It may be on another circuit from the receptacle next to it.
    If a GFI is not tripped at the Panel, a Receptacle may be tripped in the kitchen.
    Personally, I would have the switch at 1 end or the other, not between two cords/recepticles.
    kbuchholtz's Avatar
    kbuchholtz Posts: 110, Reputation: 2
    Junior Member
     
    #3

    Jun 6, 2010, 11:25 AM

    No GFIs are tripped at any recepticles or at the panel. The switch is on the end. The middle receptacle plug is the one that is not working. The plug and switch on the ends are both working fine.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Jun 6, 2010, 11:31 AM

    An Electrician will remove devices from that box, test, and if not that box, they will test the box prior to that box.
    Verify all GFI's in Kitchen will trip and reset.
    Sounds like that is not a GFI and you have GFI"s leading me to believe it is protected by one. May be easy to determine as you are only supposed to have 2 recepticles per breaker max. which would be a GFI and a regular receptacle per circuit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I stop my computer from going off in the middle of working on a page [ 2 Answers ]

When I am working on line. My computer goes back to the sign in page. Why? And I would like to stop it from doing it. Can you help

Same as one posted... stopped working in middle of cycle last night; [ 0 Answers ]

When start button is pushed, clicking sound is heard, but does not start at all

Wiring a ceiling fan in middle of run, outlet at end of run [ 5 Answers ]

I am wiring a bedroom ceiling fan and just needed someone to help me figure out part of the wiring I'm not sure about. The goal is to have a 2 gang switch control the light and the fan separately. The switch is at the beginning of the run, then the ceiling fan, and then I also have an "always...

If I'm the middle-man, how to I keep the buyer from working directly with the seller? [ 1 Answers ]

I have the opportunity to buy merchandise at less than wholesale & resell it to an overstock retailer. I don't own the inventory. How do I make a deal to buy and sell without the two parties contacting each other directly. If I let the buyer know the full details of the product, they can contact...

Outlet not working [ 1 Answers ]

My outlet in the kitchen worked yesterday and now it is not working. Not sure how to determine how to fix... ideas?


View more questions Search