 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a leaking diverter with 1 handel. I removed the knob and plate there is a retaining clip around the valve stem that iI removed how do I remove the valve stem.
Hi, new here. I have three valves in my bathroom shower, hot cold and diverter for shower head. I recently replaced all three, they are phiser. Following replacement all worked fine the diverter valve became hard to turn and is not very difficult to open and close. It feels like I'm going to...
Hi I have an old shower, connected to the bath in standard fashion. Just lately the shower pressure from the head has dropped radically. At the same time, the diverter has stopped functioning properly, popping out when the bath is running, switching the shower on. I've followed some advice and...
My shower has three knobs and the one in the middle diverts the water flow from the tub spout to the shower. I think that means I have a 3 valve diverter valve, if not please correct me. When I turn the diverter knob so that the water comes out of the shower, there is still significant water...
I was washing the dishes and when I went to press to spray nozzle, no water came out. Then when I went to use the faucet, no water came out as well. I think this may have to do with the diverter in the spray nozzle? What are your thoughts? And how do you remove the spray nozzle?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
