Check out some similar questions!

flipside82 · Dec 11, 2006, 02:07 PM

I'm trying to install Windows XP Home Edition SP2 on a home built machine. During the installation, right after it formats the drive and starts copying files, it stops at the same file every time. It errors out trying to copy the same file every time and with several different cd's. I've even tried XP Pro CD's and they didn't work. I also tried a brand new hard drive and a brand new IDE cable. I am using an ASUS P4S800-MX motherboard. The computer recently was shut off unexpectedly and then just started rebooting over and over and it would never load the OS. Any ideas? Thanks in advance.

jhiltonw2 · Dec 11, 2006, 02:24 PM

I had the same problem At what part is it stopping

flipside82 · Dec 11, 2006, 02:43 PM

Basically it stops at loading an audio system file. I don't know the exact filename. But no matter what CD I use, it stops copying files.

Morrowrj · Dec 13, 2006, 07:14 PM

With this mobo you need to make sure you have the latest bios version. Check Asus website for the latest. They also have instruction for updating.

Good Luck

bmw494 · Dec 14, 2006, 09:05 AM

Originally Posted by flipside82

I'm trying to install Windows XP Home Edition SP2 on a home built machine. During the installation, right after it formats the drive and starts copying files, it stops at the same file everytime. It errors out trying to copy the same file everytime and with several different cd's. I've even tried XP Pro CD's and they didn't work. I also tried a brand new hard drive and a brand new IDE cable. I am using an ASUS P4S800-MX motherboard. The computer recently was shut off unexpectedly and then just started rebooting over and over and it would never load the OS. Any ideas? Thanks in advance.

I had a similar problem to what you had, and found out it was my RAM causing this issue. I replaced the ram, and now it works fine.

flipside82 · Dec 14, 2006, 10:05 AM

It was the RAM on my machine as well. Thanks for the posts. It's now working great with the new RAM.

c_starrs · Dec 28, 2006, 02:34 PM

I had the same problem, but I found the answer, if you skip that file and wait till the computer loads up, go into Control Pannel> Administrative Tools> Computer Management> Device Manager and you'll see, a device named (something) Contoller where that "something" is search for it on Google with the word driver after it. i.e IDE ATA/ATAPI Controllers, IF that was it then you'd search "IDE ATA/ATAPI driver" then use common sense to download the right driver. I can't tell you the exact one to download because I don't have an ASUS motherbored... If you are confused, then tell me, I'll try explaining it more :-)

Tell me how it goes please :)