Ask Experts Questions for FREE Help !
Ask
    kashif_mr's Avatar
    kashif_mr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2010, 12:17 AM
    3 phase air conditioning
    What problems can occur if a specification has been written incorrectly for a three phase air conditioning system to be used in a manufacturing plant. Specific attention is to be paid to the three phase electrical supply for the system and the problems that may occur with the electrical components.
    Using examples of problems that may (or could) have occurred; and how such problems could be resolved.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 5, 2010, 04:38 AM

    I think your doing homework. Look at a few issues:
    1. inadequate wiring
    2. OCPD sized too high

    Look at it in terms of a motor load.

    Then, there is "who's fault is it"? And "Who pays?"
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Home air conditioning unit is running no air blowing from vents [ 5 Answers ]

My a/c unit runs but, no air coming through vents the temp in house stays the same. I looked at it on the roof and water is heavily dripping from it. The unit is off now

1991 honda accord air conditioning stopped blowing cold air [ 0 Answers ]

Is there a relation to my crappy fuel millage, no cold air blowing from my air condition, and my very erratic idle issue? Is my ecu ? Or a valve sensor?

My ruud Heating & Air Conditioning is not blowing hot air [ 1 Answers ]

My ruud Heating & Air Conditioning system is not blowing hot air, everything is working fine but not blowing hot air when I put it to heat

What is difference between split Air Conditioning & window Air Conditioning [ 1 Answers ]

What is difference between split Air Conditioning & window Air Conditioning

Single Phase Air Conditioning Condenser Wire Gauge Specs [ 2 Answers ]

Hi, I would appreciate if someone could tell me what gauge wire I am supposed to use with a single phase motor air conditioning condenser rated at 40 amps and/or 60 amps Thank you

View more questions Search