 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower fan slow
HI,
Fan runs very slow after I give it a push. I replaced the run capacitor and no change. I'm wondering if I have the capacitor hooked up correctly. I have two brown wires and one white wire, the two brown wires are hooked to one terminal of the cap and the white wire is hooked to the other terminal. Is that correct? Shame on me for not making a note of that prior to removing the wires from the old cap. If I have hooked the wires up correctly, does this mean a new motor is in order? By the way this is an older Ruud furnace. Thanks |
||||
Check out some similar questions!
Why would my blower fan (squirrel cage) run slow on the heating and cooling cycle? I can spin it by hand and it will slowly start but not get up up full speed.
I am young but need help... my neighbor fixed my ac how blessed am I but now the fan is blowing slow so the air is slow help what do I do... have enough stuff to take my money this is too much to call the big guys in... help
When I turn on the A/C at my house it running 5 min and then is stopped ,but the unit out side still running.I did change the control board and the capacitor already but is still happen again.I check the motor blower is really hot.also when the blower fan run was very slow,it not running like...
What I would like to do is convert my furnace fan to be able to run at a slow speed all the time to continually move the air through out the house janitrol furnace:confused:
Last night I heard a rumbling noise coming from the closet in the hallway where our Trane XE80 gas furnace (April 1996) is located. With the door open the noise appeared to be coming from the blower area. We are in the heat of summer so, to stop the system, I set the temperature on the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
