Ask Experts Questions for FREE Help !
Ask
    anwarelc's Avatar
    anwarelc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 3, 2010, 01:09 AM
    UPS load calculation
    I have 10 computer I need connect only CPU with UPS, how to calculate the load for 10 CPU
    InfoJunkie4Life's Avatar
    InfoJunkie4Life Posts: 1,409, Reputation: 81
    Ultra Member
    		  
    #2

    Jun 4, 2010, 01:21 PM

    You have to take the max rating of each computer and rate them together. Each should have a wattage power rating. If you need an amperage rating, it can be converted.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Load calculation [ 3 Answers ]

How is the load for a sub-panel calculated? I had asked this in another post but never found an answer. This for a laundry room with a 240 volt /30 amp dryer and two 20 amp 120 volt ckt and one 15 amp 120 volt ckt. The feed line is apox. 25 feet. What size breaker should I install in the main panel?

Load calculation [ 0 Answers ]

How do I estimate the size of the solar appliance that will support the load in a goven building?

Load calculation [ 1 Answers ]

There is a indoor pool and normally water is heated to temp 40 deg c. Total water quantity is 15000 ltrs. Out door temp is 44 deg c. The indoor a/c results in high amount of condensataion in supply grilles. FCUs are used to cool the area with 10% of fresh air. There is no possibility of untreated...

UPS VA rating calculation [ 2 Answers ]

I have an online UPS. It got 6 batteries of 12v in series. Each battery has got 7.2AH. Now I want to know What is the Wattage & VA Ratings of my UPS.

Load calculation [ 1 Answers ]

Hi Please advise me what are the factors considered for calculating the Tonnage Rate whilst selecting the AC units for Industry / office environment. Regards Pankaj

View more questions Search