Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Engine oil mixed with coolant after oil seal ring failure what next?
[ 0 Answers ]
OK MY 97 jetta was spewing oil from above the filter cranked the car and the oil light came on. Checked the oil level and discovered antifreeze mixed in the oil. Is it a blown head or possible that d/t oil cooler o-ring failure that it leaked into the engine? Should I flush out oil and change...
Jonsereds chain saw oil mix
[ 3 Answers ]
I recently purchased a used Jonsereds chain saw. It is an older model. What is the proper oil to gas ratio mixture. Is it 50 to 1 or 40 to 1 or Some other ratio?
I put too much oil in my new B&S lawnmower
[ 3 Answers ]
:mad: Being new to this whole lawn care thing after recently firing my gardener, I did something stupid. This morning was the 2nd time I attempted mowing. I started it up and did half the lawn and the mower started sputtering a little and ended up dying and when I tried to start it back up there...
Lawnmower Engine problem
[ 3 Answers ]
The Tecumseh 13 h.p engine (OHV130) in my lawnmower stops after about 20 minutes - after cooling down I can again run it for about 20 minutes. Any ideas from anyone about this problem - I've changed the spark plug without any improvement. View more questions Search
|