Ask Experts Questions for FREE Help !
Ask
    JD14110's Avatar
    JD14110 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 31, 2010, 09:49 AM
    Hunter Ceiling Fan:Power on High but it barely turns,oil OK,pull chain on high,HELP
    Hunter Ceiling Fan: variable power switch on wall on High, pull chain on High but the fan barely turns. Oil OK. Have to give blades a push to get them to turn but once turning, they move at the slowest speed possible. Any ideas for what to do?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Jun 22, 2010, 12:21 AM

    What model Hunter fan?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #3

    Jun 22, 2010, 12:22 AM
    When you bypass the wall switch, how does the fan behave from the pullchain?

    When you spin the blades by hand, how long do they keep spinning for?

    General ceiling fan troubleshooting and help FAQ- Ceiling Fans N More

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter ceiling fan pull chain replacement [ 4 Answers ]

I replaced the three speed pull chain unit on my Hunter ceiling fan. Now I have four speeds and no "off". The wire colors were black, grey, brown and green. Any ideas?

Chain pull hunter, no middle speed. Starts high, then low, then low, then off. [ 1 Answers ]

Three speed hunter ceiling fan. 8 years old. Pulling chain was guessing game. Never knew what speed you'd get, Had to keep trying to turn off, never worked like it should. Had a handy man put a new switch in, now it starts in high speed, then low speed, and low speed again, then off. Can't get...

Hunter ceiling fan works only on high [ 2 Answers ]

I have a hunter "original" ceiling fan-the heavy cast iron model-at high speed it runs but slowly at medium speed it barely turns and at low speed it won't turn at all even though motor is still running <Moved from Home Electronics> - KISS

Ceiling Fan Stays on High Even After Pulling the Chain! [ 5 Answers ]

My ceiling fan is on HIGH, the third setting, even after pulling the chain. I keep pulling the chain and it keeps running. Can someone help me with suggestions please?

HELP! Wiring a pull chain in a Hunter ceiling fan [ 3 Answers ]

Ok, my 81 year old mother's ceiling fan pull chain broke off inside the switch. I was careful when I changed the switches, only changing one color at a time. It didn't work, so I called my electrician brother-in-law who discombooberated the whole mess, told me the switch I got was bad and went on...


View more questions Search