How to convert amps to ka

epsiuy Posts: 1, Reputation: 1

New Member

May 31, 2010, 07:32 AM

how to convert amps to ka

how can I calculate the total/individual load for distribution board(lighting db) of a 11kv substation building.
and the mccb used.
if I am using 2x36w primatic diffuser.13 a sockets... which mcb(rating) I can use

Check out some similar questions!

How to convert amps to KVA [ 6 Answers ]

I need to know how many KVA is 800 amps at 208V

50 amps vs 100 amps? [ 5 Answers ]

I recently purchased a new mobile home in Ventura, CA. The home was a "lot model" that was originally delivered from the manufacture and set up on a site, used as a model and then taken down and delivered to where I am now. The Manufacture says that it was built to run on 100 amps - it is 60...

Cost to upgrade from 100 amps to 200 amps and ground [ 4 Answers ]

StanFortyMan has made a lot of sense about my needs in a home with a 100 AMP Service.. I would like to upgrade to 200 amps.. with some ground sockets(or whatever this is called) and put in more sockets... The house is 1300 square feet... does anyone have a guestimate of costs?? Thanks, Annie

100 household amps vs 200 amps [ 6 Answers ]

I am living in an "old" house with 100 amps coming in. I am in the process of doing reconstruction and would like to know if I run all new wires and outlets and get rid of dusty broken wires and connection boxes left open to rot---Can I use the same fuses and wiring for 100 as for 200 or do I...

Changing from 100 amps to 200 amps [ 1 Answers ]

I have a gas water heater (40 gallon tank). I want to change it to an electric tankless water heater. I have read that I need 200 amps in the house to do this, but currently I have only 100 amps. The outside meter is located only about 25 feet away, but the lines are underground. What is...

View more questions Search

Check out some similar questions!

Add your answer here.