Ask Experts Questions for FREE Help !
Ask
    groomedpaws's Avatar
    groomedpaws Posts: 23, Reputation: 2
    New Member
    		  
    #1

    May 30, 2010, 08:25 PM
    How hard is it to install your own handsfree car kit
    I am thinking of buying a handsfree car kit due to the law about cell phones and driving. Is it hard to install one yourself? I have a porsche boxster.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    May 30, 2010, 11:34 PM

    Here is some info on installation: Parrot USA - Installation diagrams for hands free car systems

    So, it depends. If you can get a harness kit, it makes life easier especially if you can get both ends.

    As an example, see Parrot Kits and Quick Connect Harness Adapters

    Click on "Why do I need a harness" as well.

    For this mfr, it doesn't look like a harness is available.

    If you've never taken a dash apart, it can be an undaunting experience. I've installed an AC unit from a box and an alarm system with home made door locks and a car stereo.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Install ceiling fan w / light kit [ 4 Answers ]

I am installing a ceiling fan w / light kit .the fan has a black,white, blue and green wires. The ceiling has black,white ,red , green and ground .there has never been a light installed there b/4. the wall has a separate switch for the light and fan. How do I wire it??

Light kit install for a ceiling fan [ 3 Answers ]

I have a Hampton Bay fan and Harbor Breeze light kit. The fan is already installed. I just bought the light kit and I found the blue and white light kit wires in a plastic bag in the fan. However, they are not connected to anything in the fan. What must I do to connect them to the fan after I have...

Install a Hard Drive - Install Error [ 11 Answers ]

HELP! I have a Compaq Presario 5333cl desktop with an Seagate 80GB HD (IDE). Running Windows XP SP2. Am using Casper XP 3.0 cloning software, (which worked perfectly on my Dell). Installed WD 320GB HD in disk #2 position. Both drives set to cable select. (Casper works within Windows, so...

Hard start kit [ 1 Answers ]

Should a new 2.5ton condenser - located on the roof (50'feet + away) and 3 coil inside - need a hard start kit? I thought hard start kits were for old equipment? Should I ask for a new condenser? THANKS!

New Install:HW CT3500/new HP w/o heat kit [ 2 Answers ]

On my second try, following advice of AC guy and conforming to Honeywell diagram for "4-wire sgl stg HP (jumper intact), I have wired the HP to thermostat as follows: R=R+Rc; O=O; Y=Y+W; G=G; FUEL SWITCH set to E. Nothing works. On my first try I had R=R+Rc; G=G; Y=Y; C (Blue terminal) which should...

View more questions Search