Ask Experts Questions for FREE Help !
Ask
    lbatson's Avatar
    lbatson Posts: 1, Reputation: 1
    New Member
     
    #1

    May 30, 2010, 01:49 PM
    MTD Yard machine w/B&S 12.5hp ohv won't start.
    It was running fine and while in the midst of cutting, it died and when trying to restart, it would just click. I initially thought starter, so I rebuilt and it is working fine when benchtested. I moved over to the solenoid and replaced as I had a new one to begin with. Tested batter as well, battery is good. Still only clicked when I tried to start. I turned by hand unti it froze then attempted to crank. It fired up the made a sound that sounded like someone dropping a socket into an engine, then died. Since then, it will crank but only spin, does not fire up and I can spin it with one hand and hardly any tension. Please help...
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    May 30, 2010, 06:13 PM

    1) Flywheel key is sheared. Replace.
    2) Adjust valves
    3) Worried about possible internal damage such as broken rod or bent valves. After doing 1 & 2 crank engine with plug removed, manually first.

    Initial problem probably valves. Starter was probably OK.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD 14.5HP 42" (Briggs & Stratton OHV) [ 5 Answers ]

I have an MTD 14.5HP 42" that has a Briggs and Stratton OHV engine. It is about 10 yrs old and has been sitting out for a couple years because I no longer had much of a yard to cut with 3 kids worth of stuff in back. We bought a new house that has 2 acres so now I need this again but I do...

MTD yard Machine won't start, why can't jump start [ 2 Answers ]

I have a 600 series yard machine and a couple of weeks back when I turned the key to start it, it acted like the battery was dead. I jumped it off from my car with no problem. I had planned to charge the battery but forgot. The next week when I went to mow the yard, again it acted like a dead...

Mtd yard machine mower won't hold a chagre [ 1 Answers ]

I have a Yard Machine 46inch with a 18.5 briggs & stratton . Model # 13AS699H062 / Serial # 1L066H30167 . I have replaced the battery , alt. and solenoid . Fuse is fine and battery cables are fine . The problem is the battery is not getting charged . HELP PLEASE .

Yard Machine with 14.5HP Briggs won't turn over [ 3 Answers ]

I have a Yard machine lawn tractor that has been running great. Today my wife said it died on her. I tried to crank it and can only get it to turn over one revolution. Have had the battery tested and they told me it was good. Tried hooking jumper cables directly to the starter but have the same...

Yard MAchine/MTD Rider Won't Start [ 9 Answers ]

OK. Normally, I would continue to tinker if it was one of my cars, but I have temporarily been outmatched. (HA) I have a YardMachine mower that has finally decided to stop and not start or run. It started three days ago and ran for 5 minutes. This was the first start of the year. It seemed to take...


View more questions Search