Ask Experts Questions for FREE Help !
Ask
    mccoppin's Avatar
    mccoppin Posts: 3, Reputation: 1
    New Member
     
    #1

    May 26, 2010, 12:36 PM
    No vga input monitor going to sleep
    We had a bad cable for our dual video card and the cable is so old we couldn't replace it so we decided to go with a new dual video card along with an adapter. I could not remove the drivers for the old video card because the monitor wouldn't work. I turned on the computer after installation and got one long beep and two short ones. I know this is monitor related... then I got a screen that told me there is no vga input/monitor going to sleep. Is this due to the fact I couldn't remove the old drivers for the old video card? How can I remove the drivers if I can use my monitor until the new softward is loaded for the new video card? HELP! :p
    mccoppin's Avatar
    mccoppin Posts: 3, Reputation: 1
    New Member
     
    #2

    May 26, 2010, 01:07 PM

    I meant to say... how can I remove the drivers if I CAN'T use my monitor until the new software is loaded for the new video card?
    Jaymzkerten's Avatar
    Jaymzkerten Posts: 11, Reputation: 3
    New Member
     
    #3

    Jul 2, 2010, 02:29 PM
    That POST error is definitely video related. Does the video card have a port on the side of it (what looks like you would plug a 6 or 8 pin cable into)? If so you need to make sure your power supply has a cable that will plug into that port or the video card won't be getting enough power.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No VGA Signal - Monitor Going To Sleep [ 9 Answers ]

Hello, I am having problems with my monitor! The PC works fine for an unspecified period but then all of a sudden the monitor will flash up the message "No VGA Input Signal" and will then go to sleep. There seems to be no way of getting the PC to wake up again once it's done this and I'm left...

Monitor/vga display issues [ 1 Answers ]

Hi, just bought new PC. Acer inspire M1610 with Vista. It has SiS Mirage 3 graphics. I can't run certain games properly (although they run with degraded quality) I have searched everywhere to update the drivers but no joy. Also I have a widescreen monitor but try as I might I can't get the...

VGA Monitor - "No Signal" w/New Mobo, CPU & Ram [ 2 Answers ]

The Preamble: My old computer: ASRock K7VM2 mobo with 2GB DDR, AMD 2400+, stock CPU fan and heatsink. I was installing a PCI wireless adapter into this mobo as per the adapter's manual. After installing the software I was supposed to turn off the computer and install the PCI card, then...


View more questions Search