Ask Experts Questions for FREE Help !
Ask
    aeg12's Avatar
    aeg12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 23, 2010, 03:20 PM
    Bryant ac unit model # 561CJ030-E
    Went to turn on unit for the first time this year and it is not working. I cannot provide much more detial than that. I was reading and it says there is two breakers; one at the electrical panel which I checked and one behind the unit outside which leaves me puzzled. There is a plug that when I pull it out it says on on 1 side and off on the other but there is nothing to ensure the unit is on or off. Any help would be greatly appreciated. Thanks
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    May 23, 2010, 07:06 PM

    I can't find that particular model. There will be two breakers in the electrical panel.

    The outdoor unit has a 240 volt breaker. The inside (air handler) may be 120 or 240.

    The outside is usually just a disconnect. One would flip the pull out to off, especially if one covered the AC in the winter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant model 383k [ 1 Answers ]

My furnace burners cut on and off when calling for heat. The burner will first glow to light, than the burner will come on and five seconds later the burner will shut back off. It is almost like the furnace is short cycling. I did change the thermostat and the new thermostat is operating the unit...

Bryant model 2s to hunter model 44860 [ 1 Answers ]

I am trying to replace a bryant tstat with a hunter programmable tstat. The bryant is a single-speed heat pump with FK4 fan coil and special 3-stage electric heat (model 2s tstat) the hunter model is 44860 Assuming that it is a compatible tstat, is it easy to install? Thanks, ed

Loud New Bryant AC unit [ 1 Answers ]

I just had a Bryant condenser installed and it makes a constant very loud buzzing sound when it is on. I called the service man and he said it was normal to be loud since I didn't get a new inside unit as well. Sounds fishy...

Blower Bryant model [ 1 Answers ]

I have a Bryant furnace/air conditioning unit. The blower does not work. When the blower in turned on manual, the blower motor makes a humming noise but, the blower does not rotate. Can you assist in resolving the problem? Thanks

View more questions Search