Ask Experts Questions for FREE Help !
Ask
    robertw60's Avatar
    robertw60 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 23, 2010, 02:05 PM
    Any one know if k&w head gasket sealer work?
    I have a 2006 chevy malibu with low compression in one cylinder. Which is causing a misfire in that cylinder. I bought the k&w sealer. Does any know on well it works.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 23, 2010, 02:20 PM

    Are you thinking you can seal the leaking head gasket without removing it? You don't have much to loose trying this product but I am not optimistic, sounds like snake oil to me.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does block sealer work? [ 34 Answers ]

My engine over heated getting home. Got the car home and hissing sound from under hood. When I opened hood, noticed steam hissing out from the coolant overflow container (overflow) tube. Nothing from any of the radiator pipes. Was at night and figured out there's nothing I could do. Next morning...

Will a block sealer work [ 2 Answers ]

A mechanic friend of mine told me that I have a crack in my engine block. I have all the signs. White smoke coming from the exhast, I can put antifreeze in my car and the next day its gone, there is antifreeze mixing with my oil, the car will suddently stop on me or not start at all, and there is...

Low Compression on 2,4&6, Head Gasket Sealer As An Option? [ 16 Answers ]

Hello & thank you for your time. I have a 96 Toyota 4Runner. According to live data stream, the #2 cylinder is misfiring & 2 (155lbs), 4 (160lbs) & 6 (165lbs) were low when compression tested. 1, 3 & 5 tested fine. The vehicle runs rougher than it used to, especially at an idle. There are no...

Driveway Sealer on our brick work [ 4 Answers ]

Someone who lived here before sealed the driveway and managed to get driveway sealer all over the brickwork. Does anyone know how I could try to remove it. Thanks :)

Head gasket and block sealer [ 1 Answers ]

I think I have a blown head gasket due to water filing out one of my sparkplugs. I can tell that water is getting on the plug when I take it out because it is showing rust like water from the radiator. My question is. If I use K+W block sealer is it possible for this to stop my plug from filing...

View more questions Search