Ask Experts Questions for FREE Help !
Ask
    Juanitacash88's Avatar
    Juanitacash88 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 20, 2010, 06:22 PM
    Squrel cage fan works on heat but not when switched to ac/coleman/ moblehome
    Squrel cage fan works on heat setting but not when set to ac . Moble home coleman unit
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    May 20, 2010, 06:31 PM

    If it's a older system you have to switch from heat to cool on a switch on the air handler behind the top filter door. If you turn your fan switch to on at the thermostat will it run?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon heat ac unit fan will not turn off. [ 5 Answers ]

The fan will not turn off with thermostat in any position. Where is fan limit switch?:confused:

Fan on ON and ac not working, heat works fine [ 1 Answers ]

We just bought a new home and I know the AC worked last summer for the people who lived here. I have a LUX 1500 t-stat, a miller ac unit, and a beckett by honeywll furnace motor. Everything was serviced last year. When we put the switch to heat the furnace comes on and runs non stop. When I...

Blower works on A/C but not on heat or fan only [ 1 Answers ]

I have a 1997ish intertherm A/C unit, when the Air is on the blower works fine, but when I switch to heat or fan only the blower will not work? I have bought a new blower relay & capacitors. I tested the sequencers for 240 & 24 volt, everything is reading good. I am at a loss, does anyone have...

Coleman Evcon D.E.S. II Heat Pump- works intermittently [ 1 Answers ]

She's an old one... I'm guessing the late 70's or 80's, but since I've lived here (4years) it seems to work for a while, but then stop... I hear a fan blowing, but it's cold air. Then I look at the t'stat and the red emergency light is on... cold air coming out of the vents. I look at the unit...

Blower fan works in A/C but not heat [ 8 Answers ]

A couple of weeks ago my Lennox G20Q3E-75-1 was acting up. Gas valve was cycling when calling for heat and then once satisfied and the main burners went out the pilot light was staying lit. I thought it might be the flame sensor as far as the gas valve cycling and didn't want to tear into it so I...


View more questions Search