Ask Experts Questions for FREE Help !
Ask
    glp1954's Avatar
    glp1954 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 18, 2010, 05:03 PM
    Furnace problem
    I have an Amada 90 gas furnace with a dual stage Aprilaire 6202/6203 control panel, and an Aprilaire thermostat. When I turn on the thermastat for heat, the furnace turns on, the fan starts, the thermocoupler glows, and the burners light. Within about 10 seconds, it all shuts down, and begins the cycle all over again. (fan, burners, off!). Could someone please point me in the direction to fix this?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    May 18, 2010, 05:21 PM
    Use very fine sandpaper or steelwool and clean the flame senser, the first step,, easy and costs nothing,, then get back to us
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace problem [ 2 Answers ]

Furnace operates fine except during cycle it will shut down then come back on to complete cycle. Could this be the blower relay or something else?

Problem with furnace [ 3 Answers ]

Can anyone suggest what's the possible problem with the furnace - it makes a loud clanging noise when the heat first come on and stop right after that.

Goodman Furnace problem [ 2 Answers ]

I have a Goodman Dependable Nintytwo furnace. The draft inducer motor comes on but the furncae does not light. The motor will run for long periods. It will kick off then kick back on and the furnace will light. The furnace is not consistent, sometime it lights and sometimes it does not. It has...

My furnace is turning on and off too often why what is the problem [ 2 Answers ]

My furnace keeps turning on and off every minute. The flam comes on and than you can here a puff, than it shuts off. Keeps repeating over and over again. I can not get the temperature higher than 70 Deg. Please some one help!

Furnace Operating Problem [ 1 Answers ]

My furnace is 5 years old. Will not stay lit. The igniter lights, the gas valve open, stays on for 30 seconds and shuts down and does it over and over. Never staying operational. Please help.

View more questions Search