Ask Experts Questions for FREE Help !
Ask
    dmood462's Avatar
    dmood462 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 14, 2010, 01:12 PM
    Have a Goodman PGB024075-1. Not working
    I have a Goodman PGB024075-1. It was freezing up due to the coils / fins being covered in dust. So I opened up the top and sprayed it out. After that, it worked great for about a day. Now it will not even try to run. Neither the compressor nor blower motor runs. The blower will not run even when I have only the fan turned on on our thermostat. I opened it up, and the circuit board inside has a red LED. It was on, which means it has power, but when I turned on the AC, it blinked 6 times, then paused and blinked 6 times again. (I guess this is a signal that something is wrong with the compressor?) Then it made a loud click and the light turned off and will not turn off even when I flip the breaker on and off again. I checked the 5amp fuse on the control circuit board, but it looks OK. What should I try? I have a volt meter, but not sure what to do with it. The unit is still getting power.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    May 14, 2010, 07:02 PM

    Are you saying the control board in the furnace is flashing 6? Code should be on the back of the door.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman blower fan not working [ 1 Answers ]

I have a Goodman A32-05 Heat Pump and the blower fan will not start unless I spin it, and then it runs fine. What could be the problem?

Can't get my Goodman furnace working [ 3 Answers ]

I need help getting my goodman furnace working, I've changed the igniter and the pressure switch and it still isn't working. The light keeps blinking and it says on the door that it's a 115v reverse polarity, does anybody know what that means?

Goodman igniter not working [ 14 Answers ]

I have a Goodman GMP125-5 Rev B. The flue fan starts up and then I hear a click like the igniter should be glowing, but it doesn't. I replaced the igniter last year. I also pulled it and there are no cracks. This is the first time I have attempted to use the heater since last spring. Thanks, Al

Goodman Gas Furnace Not Working [ 2 Answers ]

I have a Goodman Model # EG030075-1AB REVC Gas Heater it has been converted to run on LP Gas. Furnace has worked fine for years. Turned the heat on and nothing happens. The LED on the control board is not lit. I checked the voltage at the control board and all the voltages appear to be normal. ...

View more questions Search