Ask Experts Questions for FREE Help !
Ask
    ESTEBAN's Avatar
    ESTEBAN Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 22, 2006, 10:26 AM
    How can I replace worn o rings in a shower faucet?
    How can I replace worn o rings in a shower faucet? Can anyone explain, please?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Dec 22, 2006, 01:32 PM
    If this is a cartridge type faucet you don't replace the "O" rings. You replace the caetridge. If this is something else click on back with the brand name of the valve. Regrds, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace those worn-out outlets! [ 1 Answers ]

This is not a question but more of a warning. When we moved into our house, we noticed that many of the receptacle outlets were worn-out and that plugs would fall out very easily. I told my wife that this is not just a nuisance, but it is unsafe, so I replaced at least half of the outlets within...

Remodel options needed: Replace bath with shower [ 3 Answers ]

I am looking at removing a standard fiberglass bathtub/shower enclosure and installing a tiled shower. What are my options for the base of the shower? I've seen one or two products online that are cultured marble bases with tile inserts that fit right into the old bathtub rough opening. They...

Trying to replace a shower with a tub [ 1 Answers ]

Could anyone tell me how to replace my shower with a tub? My father said that it would be difficult, but a plumber that was out unclogging our pipes said that if the drains did not match up we could run extension pipes. My father says only if we build up the floor first. I need to know the...

Bathroom shower - Cover or replace? [ 6 Answers ]

Hello, My bathroom shower/tub needs a facelift. She's cute, but not that cute, as my wife would say. So we're considering tearing down the tile inside the shower wall wall and replacing with new tile. Or we're thinking about just getting one of those vinyl shower covers that you place over...

Replace tub with shower [ 3 Answers ]

I removed the old tub and exposed the drain pipe. Where the drain pipe comes through the slap there is a 8x8 hole to allow the tub drain pipes to fit. I'm going to install new drain pipes for the tile shower which consist of a 90 coming out of the main drain pipe then 6" to another 90 that will...


View more questions Search