 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No cylinder conpression
Okay frist I replaced my 90 honda 1.6 head an it wouldn start an still won't start. I get spark an gas now an everything ran fine till I got this head. So I did a conpression test on the cylinders an nun is getting conpression? What is cousing this? Thanks
|
||||
Check out some similar questions!
Which cylinder is the number 1 cylinder in a 4 cylinder 1997 toyota camry?
I have a 96 Subaru Impreza which recently had an engine clean with a pressure hose. Now in low rev's (anything below about 3K) it seems to misfire, at least that's what I think is happening. As you take off, the car jerks and sputters, and has a low popping sound which I think is only in one...
I have a 1985 Chevrolet iroc and I am trying ti replace my heads. I have taken the bolts off the heads and I try to pull the head off but it will not move. I am a newbie to this job. Please provide me with any help you can.:confused: Thanks:
Just had my 01 cavalier obd ran and cylinder 1 misfire came up. I had changed the plugs and wires and made sure all have spark. Even had compression test on all cylinders and checked good. At a lost and this is stopping me from passing yearly inspection. Help!
What does it mean if you have a little bit of oil in one of the cylinders where the spark plug goes in?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
