 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore elite dryer model 110
Kenmore Elite Dryer 110 model 63932102 - machine turns on when start button is depressed but stops as soon as button is released. When button is held in machine continues to run but there is no heat. Not motor or heater relay. What next!!
|
||||
Check out some similar questions!
I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...
I have a Kenmore Elite Dryer Model #110.60936990 and it is not heating up. When you press the start button and let go the dryer will start but then it stops right then, but if you hold the start button it will continue to run until you let the button go and it will not get hot while holding the...
My Kenmore Elite Dryer Model 110.60942990 will not heat up. I cannot get the back off to check the element. Please help!
My Kenmore elite dryer will not start when the start butten is pressed momentarily. It tries to start, but stops within seconds of releasing the start button. I reviewed earlier posts on the same topic, and saw that this is indicitave of bad electronic control assembly / thermistor, which cost...
I have a dryer that runs but has no heat. The ignitor do not spark the gas to get the heat on. The model is 110.74972301. I had this on an older model and found a fuse on the back of the dryer that was an overload fuse. Replaced it and it worked. I can not find that on this dryer. Can you...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
