Ask Experts Questions for FREE Help !
Ask
    kaalvoetkind's Avatar
    kaalvoetkind Posts: 37, Reputation: 3
    Junior Member
    		  
    #1

    Apr 28, 2010, 01:19 AM
    fitting a surfboard in a getz
    hey there
    I drive a four door hyundai getz ( I really don't know about cars - that is as specific as I can get)
    And I would like to buy a surfboard that is 7,4 ft long ( I'm learning)
    I was wondering if it would fit.
    I can't find any relevant measurments on the net nor do I have a tapemeasure handy.
    7,4ft = about 2,13m
    the total length of the car is about 3,81m
    Please help and thank you in advance
    Gemini54's Avatar
    Gemini54 Posts: 2,871, Reputation: 1116
    Ultra Member
    		  
    #2

    Apr 28, 2010, 01:32 AM
    Dream on. There is no way you can fit a surfboard in a Getz.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hose fitting? [ 12 Answers ]

Hi all My problem is that I need to attach a -6 an braided hose to slightly smaller hard pipe. Obviously it dose not clamp down very well and leeks badly:eek: is there I way I can get around this by not changing the hose as the other end is paired up with the correct size hard line! Kash

Another name for fitting? [ 2 Answers ]

I will soon be taking the state exam to get my license. On the material list is a "90 degree twin elbow". Am I missing something? I don't know what fitting they are talking about. A little help would be much appreciated. Any ideas?

Fitting to use? [ 2 Answers ]

2889Please see attached picture. My question is about the fitting where the trap arm connects with the vent line. I would like to use a sanitary tee in order to be able to maintain the proper pitch for water to run. I am unable to maintain pitch if use the sanitary tee vertically. I have read...

View more questions Search