Ask Experts Questions for FREE Help !
Ask
    BlueSteele's Avatar
    BlueSteele Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2010, 10:04 AM
    Adjust clutch on a Honda 1995 CBR 1000f
    My clutch lever on the left handle bar, doesn't engaged until I have it gripped all the way down to the handle bar. Now its to the point where, with it is gripped down it doesn't engage the clutch at all.

    How do I adjust the clutch. It is hydraulic.
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Apr 27, 2010, 01:30 PM

    Are you getting freeplay at all on the handle? How many miles are on it? ( time for a new clutch). Is all the air out of the system?

    Sometimes beeding out the old fluid and replacing with new can help. Also if your not getting full throw on it then it may be worn out.

    Here is a link to a manual online.

    Ref:

    Maintenance
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the proper way to adjust a clutch (pedal) on a 4010 John Deere tractor? [ 2 Answers ]

My 4010 john deere the clutch feels like it's slipping. I've heard I just need to adjust the pedal but I'm not sure how. Any Help?

My honda CBR F4I won't start what could it be [ 3 Answers ]

It was sitting for about 4 months I trying to jump it and the ignition wouldn't even turn on

Can't get into my 95 Honda CBR 600 gas tank! [ 4 Answers ]

I can't open the gas tank on my 1995 Honda CBR 600. I am on reserve right now, so don't have much farther to travel until the tank is empty. I tried using a bit of WD40 but still the lock won't budge. I can't force the key too much because it will break off in the tank. How can I open this?

1993 Honda cbr 1000f [ 1 Answers ]

I have brought a replacement regulator /rectifier (current controller) for my honda because the wireing had burn after cutting the wire harness off I loss track on how the wire pattern was suppose to be connected. On the wire ends they were replaced with slide on connectors. Do anyone know the wire...

Is there a way to adjust the clutch on a lawn chief rider? [ 1 Answers ]

Lawn chief clutch

View more questions Search