 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
15.5 B&S seems to have 2 much compretion and will not trn the motor
My Bolens 15.5ohv B&S mower seems to have 2 much compretion and will not start. Took spark plug out and had gas to come out.when plug is out it turns over fine,put it back in it tries to turn over but want,Already check the batt
|
||||
|
||||
|
It sounds like you need to adjust the valves on the engine. It will cause it to have too much compression to turn the engine over. This video will show you how to do it: YouTube - IFIXIT4U's Channel |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I want to wire a bath room up flush toilet which is 5.3 amps motor into a curicuit with a 1500 watt wall heater ( 13 amps) on a 120 -20 amp breaker . The heater is never on and the toilet would only come on when some one uses down stairs bathroom.
What is benefit of brush less dc motor and brush less ac motor. And when we use bldc and when blac? What is different of them? What about the power saving too.
What is Stepper motor & Servo motor and its working Priniciples,area of applications? Please give solution to me.
When doing the wiring in my new garage addition, I planned for a future two post cars lift. I failed to adequately check out the power requirement for said lift. I ran 3-#12 wire+ground wire from the sub-panel to the site about 30 ft away. Now I find that on all the lifts (so far) available, they...
View more questions Search
|
