Ask Experts Questions for FREE Help !
Ask
    geornage's Avatar
    geornage Posts: 5, Reputation: 1
    New Member
     
    #1

    Apr 22, 2010, 12:43 PM
    My murry rider starts then billows smoke and quits
    I can start my murry rider it will run for 2-3 minutes then starts to sputter blowing a cloud of smoke and finally quits. 10 min. later I can do the same thing over again with same results. No rod noise.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Apr 22, 2010, 08:33 PM

    Is the smoke black or blue ?
    geornage's Avatar
    geornage Posts: 5, Reputation: 1
    New Member
     
    #3

    Apr 23, 2010, 06:45 AM

    Blue
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Apr 23, 2010, 09:47 AM

    Hi,
    My guess is that you have had gas contaminate the oil in the sump. It is overfull and this causes the oil/gas mix to be pushed past the rings and be burned in the combustion chamber. Suggest you check oil level and smell to see if gas is present. If this condition exists, engine damage can result.
    Peace,
    Clarke
    geornage's Avatar
    geornage Posts: 5, Reputation: 1
    New Member
     
    #5

    Apr 27, 2010, 06:38 AM
    Quote Originally Posted by crigby View Post
    Hi,
    My guess is that you have had gas contaminate the oil in the sump. It is overfull and this causes the oil/gas mix to be pushed past the rings and be burned in the combustion chamber. Suggest you check oil level and smell to see if gas is present. If this condition exists, engine damage can result.
    Peace,
    Clarke
    Thank you. Your suggested fix did the trick. It was gas /oil contamination. Changed oil and it is now functional. Thanks again.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murry rider model 287707 [ 5 Answers ]

Anyone out there have a illistrated parts list? And what a assembled lawn mower looks like? Mainly the deck, appears that there is either a part broken or missing . The illistrated deck would be most helpful and a parts list with pictures of each part don't know year, but is a 40" cut and 12.5 hp. ...

Craftsman/Murry rider won't start [ 10 Answers ]

I just bought a craftsman model 502-255092 (10 hp tucumseh) mower and it was running fine, I changed the belts(put the wrong one on the drive... I've figured that out) It wouldn't shift well so I tilted it on its side(carb side up) I then tried to re start it and it turned over... but would not...

Lawn Mower Starts, Then Quits [ 1 Answers ]

My lawn mower, after sitting all winter, starts up, runs for a minute but then quits. Could it be lack of oil?

1985 Honda civic smoke billows out the back [ 4 Answers ]

Smoke billows out the back of the car and I can't fugure out what the problem is because when I bought the car it did'nt billow smoke out the back. I accidentally put 10w 40 oil in it when it needed 10w 30, I'm not sure if could be the problem or not but I wonder?


View more questions Search