Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Supply line won't stop running. Main water supply off
[ 3 Answers ]
I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...
Mobile home supply valves - non-standard sizes? No adapters?
[ 3 Answers ]
I recently bought two appliances that need a cold water supply - a drinking water filter that mounts under/on the kitchen sink, and a self-cleaning cat box. Both come with T-valves that screw onto the supply valves, providing water for the appliances and the sink or toilet. The water filter...
Supply Line Debris Repeatedly Clogs Valves
[ 5 Answers ]
I have a ground floor condo apartment in a 1960s-era, four-story building that is part of a multi-building complex. It appears that debris from the aging plumbing is settling into the stop valves and faucets in my unit. First the faucets won't turn off completely, and then the stop valves can't...
Shutoff valves on shower supply
[ 1 Answers ]
Can shutoff valves be installed to a tub & shower supply valve lines? Will I be disappointed in water flow volume using 1/4 turn non-full-port ball valves? What would be recommended? Thanks Added: The valve in question is a BrassCraft KTR14C1 1/2" Nom Sweat Inlet 3/8" Comp Outlet. The...
Vanity water supply valves leak
[ 2 Answers ]
In replacing the hot and cold water supply valves under the sink I have a slow leak. The end of the copper pipe has a ridge on it with a nut receptacle behind it where I am screwing the new valve into. I have used tape and grease with no luck. Any suggestions? View more questions Search
|