Ask Experts Questions for FREE Help !
Ask
    CHUCKLE's Avatar
    CHUCKLE Posts: 13, Reputation: 1
    New Member
    		  
    #1

    Apr 22, 2010, 07:43 AM
    Frozen Water Supply Valves
    My wife has ordered new kitchen counters, sink and faucet which forces me to face a problem that I've been avoiding for several years. The old sink/faucet will have to be removed for at least one day while the new counters/sink are installed. Problem: Both hot/cold supply faucets are frozen in the "on" position. I've avoided dealing with this for some time as any "under the sink" repairs to date have been short term and we can tolerate shutting off the main water valve that long. Question: Can these supply faucets be rebuilt? Both are sweated onto the primary water lines and I don't want to lay under the sink with a torch. I believe that I can get the valve/packing gland out. The handles are removable and marked Fluidyne, Made in USA. If I get the valves out, can they be rebuilt with readily available washers/o-rings? Thanks.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Apr 22, 2010, 08:00 AM
    Shut the water off to the house and unscrew the bonnet packing nut, (see image) If the stems are frozen place a pair of pliers on the handle for leverage and begin to apply pressure counterclockwise. They should back out with a little help from you. Good luck, Tom
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Apr 23, 2010, 06:41 AM

    Do you think that repair parts are readily available?
    Sure. Simply purchase a new aqngle stop and use the parts out of that. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Supply line won't stop running. Main water supply off [ 3 Answers ]

I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...

Mobile home supply valves - non-standard sizes? No adapters? [ 3 Answers ]

I recently bought two appliances that need a cold water supply - a drinking water filter that mounts under/on the kitchen sink, and a self-cleaning cat box. Both come with T-valves that screw onto the supply valves, providing water for the appliances and the sink or toilet. The water filter...

Supply Line Debris Repeatedly Clogs Valves [ 5 Answers ]

I have a ground floor condo apartment in a 1960s-era, four-story building that is part of a multi-building complex. It appears that debris from the aging plumbing is settling into the stop valves and faucets in my unit. First the faucets won't turn off completely, and then the stop valves can't...

Shutoff valves on shower supply [ 1 Answers ]

Can shutoff valves be installed to a tub & shower supply valve lines? Will I be disappointed in water flow volume using 1/4 turn non-full-port ball valves? What would be recommended? Thanks Added: The valve in question is a BrassCraft KTR14C1 1/2" Nom Sweat Inlet 3/8" Comp Outlet. The...

Vanity water supply valves leak [ 2 Answers ]

In replacing the hot and cold water supply valves under the sink I have a slow leak. The end of the copper pipe has a ridge on it with a nut receptacle behind it where I am screwing the new valve into. I have used tape and grease with no luck. Any suggestions?

View more questions Search