Ask Experts Questions for FREE Help !
Ask
    oldnbold's Avatar
    oldnbold Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2010, 07:39 AM
    how to remove front rotors on 1993 chevy suburban 2500 4x4
    I have already removed the callibers&the large nut on the spindle.I then tried tapping on
    The rotor w/hammer but doesn't seem to budge.do I need a wheel puller because the
    Rotors are pressed on or do I need a bigger hammer?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Apr 17, 2010, 08:24 AM

    You will likely need to remove the caliper bracket--usually two 15 mm bolts.

    This idea may help you separate the disc from the hub: screw two bolts into the disc to push it away from the hub, turning each bolt two turns at a time to prevent cocking the disc excessively.

    Be sure to remove all rust, since it can affect lateral runout (LRO).
    4322558's Avatar
    4322558 Posts: 13, Reputation: 2
    New Member
    		  
    #3

    Apr 17, 2010, 07:51 PM

    Did u remove the brackett that holds the break caliber on ?
    4322558's Avatar
    4322558 Posts: 13, Reputation: 2
    New Member
    		  
    #4

    Apr 17, 2010, 08:07 PM
    My misstake disc regarg that last satmtemt
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to change break pads and rotors on a chevy silverado [ 3 Answers ]

I have a 2006 chevy silverado crew cab 5.3L V8, and was wondering how to change the break pads and rotors? -- I have a pertty good idea but I just want to make sure I know before I start ripping it all apart.. and do slotted and drilled rotors make a difference other then the look?

1988 chevy suburban won't stay running [ 9 Answers ]

My 1988 R10 suburban 5.7 starts fine but stalls after 5 or 10 seconds, wait another 10 seconds it will start again and stall, every so often it will stay running for varying lenghts of time but will stall and start with the 5 or 10 second thing again, I removed the map sensor it idled rough but...

How do I remove the front bumper cover on a 2000 chevy malibu [ 0 Answers ]

Because of damage I need to replace the front bumper cover on my 2000 chevy malibu. How do I remove the bumper cover?

98 dodge 2500 gas 4x4 [ 1 Answers ]

I have purchased a 98 dodge 2500 4x4 gas 360 engine , it has a miss and the transmission will not shift into o/d . I have had a nech. Do a complete tune-up replaced a injector and the intake gasket . The problem is still there , any help ?

View more questions Search