Ask Experts Questions for FREE Help !
Ask
    kaurit's Avatar
    kaurit Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2010, 09:18 PM
    Briggsandstratton 13hp
    I have 13hp briggsandstratton got too much compresion will not turn over more than once .has automatic lever that I would like to find can any one help
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Apr 12, 2010, 06:00 PM

    Check the clearance on you valves probably to to be set,if its your automatic compression relief your looking for that's on the camshaft.
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
    		  
    #3

    Apr 13, 2010, 08:35 AM

    This is a good video on how to adjust the valves:

    YouTube - Lawn Mower Repair Valve Adjustment
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda 13hp will not start [ 1 Answers ]

My honda 13hp riding lawnmower will not start I bought a new sparkplug but that didnthelp I don't know what to do?

13hp mtd not starting [ 2 Answers ]

My 13hp yard machine by mtd not starting.I replace the coil after I had no spark,it only ran for about 20 minutes.Now it won't start and I have no spark.Iwonder if it is the coil again?

13hp briggs and stratton [ 3 Answers ]

Help needed please I have a hayter ride on mower with a 13 briggs stratton engine .it will run OK without the air filter and breather pipe connected but as soon as I refit the air filter ,plug rubber breather pipe in place and then it won't start .if I put my thumb in the breather it won't run .I...

16.5 mtd briggsandstratton stater bad? [ 1 Answers ]

I have a 2004 mtd lawntractor for a while I kepted having a dead battery seem to have fixed that when I got to cut grass and start it it I have to turn it several times the first few times I do this the starter is hot I have put a multimeter on my battery and it is at 12.67 volts it seems after I...

View more questions Search