 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat
I just bought a honeywell rth7000 thermostat, to replace my old manual thermostat.
My old thermostat only has two wires, black and white. On the old thermostat the was wire was connected to "E" and the white had no label. Both wires were connected to RH at the furnace in different location.. Not sure where to connect black and white wire on digital thermometer... |
||||
|
||||
|
I don't really understand your statement but I will tell you that he two wires should connect to the RH and the W on the new thermostat. It does nt mater which wire goes to which pole on the thermostat. Still I don't undertand the "Both wires were connected to the RH at the furnace" but if you did not move them the thermostat should work.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello I am having trouble with installing a new thermostat. I have an electric air and heat unit. I purchased a honeywell that matched. The only problem is that my wiring, which is aluminum has only 3 wires and the honeywell shows 5 wire connection. What do I need to do?
I have two Maple Chasee (Robershaw now)thermostats in my house controlling two separate rooms. Recently one thermostat stopped turning heater on, but still working on cooling. My other thermostat worked fine both on cooling and heating. I bought a new Robershaw 9600 and replaced the old Maple...
I have been having some issues with the heater lately. First off I have a heat pump with backup gas furnace, and a/c. It seems that the fan continually runs. It also seems that the heat pump never runs even though I have the thermostat set to “heat” not “emer heat”. Also the fan seems to run...
I am having problems with wiring up a thermostat. We have a Trailer with an electric furance and an outside A/C unit. There are a red and white wire from outside.and a 5 wire from furance to thermostat. The furnace has RC RH G C W. I need help.
I am trying to install a new digital thermostat to an existing RUDD system. The original RUDD thermostat is currently installed. How do I find out how to install the thermstat? The wiring diagrams do not match the wires I have installed. And how do I find out what type of system I have for air...
View more questions Search
|
