[Nomics]

How do I replace the starter on my '97 Accord. I have already purchased the starter but I have never put one in myself. Any tips, cautions? A few weeks ago the car began to "click" but not turn over, if you turn the ignition off and on a couple of times it would start but now if just won't start.
Thanks for any help you are able to give.
Dan

[TxGreaseMonkey]

Honda Starter Replacement

1. Disconnect the negative battery cable.
2. Disconnect the starter cable from the "B" terminal on the solenoid, then the BLK/WHT wire from the "S" terminal.
3. Remove the two bolts holding the starter; then, remove the starter.
4. Install in the reverse order of removal.

NOTE: When installing the starter cable, ensure the crimped side of the ring terminal is facing out. It's a good idea to clean both terminals and connectors with #240 abrasive cloth and coat with dielectric grease