Ask Experts Questions for FREE Help !
Ask
    Vincenzo099's Avatar
    Vincenzo099 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2006, 09:32 AM
    Fuse box info 1991 Honda CRX
    I bought a 91 CRX from overseas. All the labelling in the fuse box is in Japanese.

    Where could I find a drawing with the labelling in english?

    Cheers,

    Vince

    Canada
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 18, 2006, 09:58 AM
    Call around to junk yards for an underdash fuse box cover. See if this helps:

    http://www.honda-tech.com/zerothread/1736267
    tyler1988's Avatar
    tyler1988 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 29, 2006, 10:13 PM
    Quote Originally Posted by Vincenzo099
    I bought a 91 CRX from overseas. All the labelling in the fuse box is in Japanese.

    Where could I find a drawing with the labelling in english?

    Cheers,

    Vince

    Canada
    So you can't find it eather
    tyler1988's Avatar
    tyler1988 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Dec 29, 2006, 10:15 PM
    I can't find the fuse panel in english eather but I don't have that laboling in my car most of my bottom dash is missing !
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2 Problems 1991 Honda CRX [ 2 Answers ]

1. Runs hot (almost overheats) in hot weather--only when the air conditioning is on. 2. Brake pedal very spongy/goes all the way to the floor, only in hot weather and car is warmed up (and even then not all the time). Otherwise the brakes work fine. Any ideas?

1990 Honda CRX Unable to read fuse instructions as it is in Jap! [ 1 Answers ]

I am unable to read the instrustions on the fuse cover as it is in Jap and not english, can anyone translate this for me to English

A/C fuse box height [ 1 Answers ]

I am moving an exterior a/c compressor to a new location and have to move the breaker box too. It is currently at 48", is that a code requirement or can I locate it lower to 36". Thank you

Dryer causeing fuse box to get hot [ 3 Answers ]

My dad has a new dryer that keeps causeing fusebox to get hot whenever You are running the dryer. The old dyer did not do this? Help. moose8606

Please explain this, Time delay fuse box, [ 2 Answers ]

The house I bought has a time delay fuse box system? Does this means after a fuse box breaker blowes and I reset it I still have to wait before it will reset it self? I want to upgrade to a 200 amp box what should I look for, I have a GE Box, all are 20 amp breakers, there are a couple 30amp...

View more questions Search