 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Old honeywell thermostat wiring
I'm about to purchase a replacement thermostat The thermostat currently installed contains a mercury sw, temp sel slide lever at the bottom, heat / off / cool sw on rt side and auto /on fan sw on lft side. The existing connection is.. blue wire to grn, wh to wh, red to red and blk to yel. The wires at the furnace terminal connect the same way except blk goes to C. The system is a carrier weather maker 8000. My question is what replacement to buy without all the bells and whistles but with day night settings.
|
||||
Check out some similar questions!
I have a weathertron by trANE AND I HOOKING UP A HONEYWELL PRO TH 3000 SERIES I NEED TO KNOW THE conversion of the WIRES between the two thermostat . PLEASE HELP ask if you need more imfor
Dear sir, I purchased a honeywell digital thermostat, non programmable, and replacing the honeywell mechanical. The prooblem is i used terminals g y o w2on the old the new has e aux ygolrbc,i can hook up the gyo but,where does the brown wire go.the new honeywell is for heat pump also th321od ...
I asked a question about installing a new Honeywell thermostat to an old system My system (old coal converted system) has a Homart(Sears) thermostat that has only 2 wires to the thermostat. I am now replacing this with a programmable Honeywell RTH2510. The answer was as follows. Follow the...
My son had a Honeywell Simple Comfort 3001 thermostat zapped during a thunderstorm. He purchased a Honeywell RTH230B to replace it. The 3001 had wires going to 5 terminals: RC, G, Y, W, C. The 230B has 5 terminals but two of them are bridged: RH and RC bridged, G, Y, W. Where do we connect...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
