 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Chrysler grand voyager will not start, diesel manual
My chrysler grand voyager rhd 2004 diesel manual, will not start, battery is OK, I think it is the inhibitor switch which is operated by the clutch pedal, but there are two switches which are dificult to get at which one is the inhibitor, the one with two white wires closer to the brake pedal or the other switch. Any help would be welcome... thanks
|
||||
Check out some similar questions!
Hi, I have a 96 Plymouth grand Voyager 3.0 L, and need to replace both transmission sensors (input and output) I found pictures on differents sites about the location, but once I lift the car and start figuring out... I can't find them!! Where is exactly the location and what steps should I take...
Hello, I replaced the BCM in my 1998 Plymouth Grand Voyager with a used one from a salvage yard. As soon as we re-connected the battery, the alarm starting going off ( we did not even know the van had a security system as the alarm has never gone off and we do not have the keyless remote ) We...
I have a 1999 Plymouth Grand Voyager that gives us trouble starting when it is very cold! The starter will click a couple of times and then nothing! Then, maybe 10 seconds later, it will just kick off as if there were no trouble. Any suggestions as to causes? We have considered the starter, the...
Does anybody know where to locate the trailer wiring harness on a 97 Plymouth Grand Voyager ?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
