 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Have an 18 hp 42" cut craftsman riding mower (Briggs and Stratton engine) model 917.273762. The problem started three weeks ago. I was mowing and after an hour or so the engine started to bog down like it was getting too much gas. If I idled it lower it would continue to run. When I would ty to get...
I have a troy bilt riding mower model 13ax60tq766 that will statrt and run about 5 seconds. The head light have no switch to them and when the cut off the engine stops running. I am no electrician so could it be a bad ignition switch?
Have esears snowblower that is not getting any spark. Points are good and I think the plug wire is good and the plug is new. Any ideas
Mower won't start; I've tried jumping the solenoid & all I get is spark, it still won't start. The battery is new. Thx!
MTD walk behind with Honda. Stopped to move something out of way and it wouldn't start. I checked the normal, fuel, spark, and only thing I noticed was spark started strong and then died down low. I checked using other plugs and verified the spark starts real strong then drops back. I'm using a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
