Ask Experts Questions for FREE Help !
Ask
    McLemore's Avatar
    McLemore Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2006, 02:21 PM
    Wiring Helix II Ceiling Fan w/Light Kit
    Fan comes with 2 hot wires black for fan and blue for lights.
    House is wired with a double switch hot wires are red and black.
    We've tried several combinations but the switch always throws- do you have any suggestions on how we should connect these wires.
    We do have the common white wire and the green ground.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 16, 2006, 11:28 PM
    Black-black
    Blue-red
    White-white
    Green-ground.

    http://www.ceiling-fans-n-more.com/c...fan-wiring.php
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Light Kit for Ceiling Fan [ 2 Answers ]

I just bought I Home Essentials ceiling fan from K-MART and I wired the fan portion just fine. The wires were nice and color coded Black to black, red to red, white to white and green to bare copper for the ground wire. I turned on the power and it works fine. When I shut the power back off,...

Ceiling Fan Light Kit [ 4 Answers ]

I've been trying to figure out how to do this and I'm slowly getting there. I wasn't able to buy just the light switch itself, I had to buy the whole unit with one black wire and one white wire coming out top. I'm assuming that has to go back up into the fan unit but I'm stumped as to how I get...

Ceiling fan with light kit on separate switches [ 1 Answers ]

I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...

Light kit for ceiling fan [ 1 Answers ]

I just purchased a Harbor Breeze 52in. Helix II Ceiling fan. The light kit came with the fan. There are 5 G9 blubes that came with the light kit. My problem is that the fan works properly but the lights will not come on. The instructions say to "connect the black wire plug from the fan to the...

Ceiling Fan - Light kit removal [ 1 Answers ]

I have a Hampton Bay ceiling fan - model CC 52HD. It currently has a light kit attached to it and I'd like to remove it, but need the "cap" that should fit over where the light kit currently is attached. Anyone know where I can find one of these? Are they standard?

View more questions Search