 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi, I have an older Coleman through the wall natural gas heater. The control is on the gas regulator, not mounted on the wall. The problem is "pilot won't stay lit". It uses a thermocouple, 24", the kind you can easily find at Ace hardware. The problem is that the thread at the regulator end is...
How do I remove the thermocouple from a Coleman 7900 seris Presidential furnace? The pilot stays lit only as long as I have the button depressed.
I have a Lennox G12 furnace, about 20 years old, still working well except for the pilot light which has its off moments when it keeps going out. These seem to be periodic in that it will stay on for quite a time then start going out again for a few days, after which it works OK again. I have had...
As I had stated in a previous question I have a few minor problems with the furnace in the fourteen years we have it. This is the most annoying one. I have replaced it at least 20 times. A service man installed one that lasted only seven days. I had the gas company install one and it lasted...
I had a problem with my water heater. Its only 3 years old and when it got turned back on it worked for a bit then stopped. I then couldn't get the pilot light to stay on... held for many minutes. Being uneducated in water heaters I just assumed it was the thermocouple. As I started to dissasemble...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
