 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan replacement fan switch
I was trying to replace a ceiling fan 3 speed switch. I forgot to mark the wires. I have a red wire coming out of forward and reverse. I have a black wire coming out of the ceiling and I have a blue and black wire coming from the motor of the ceiling fan. The switch is marked L, 1, 2, 3-Do you know what wires go where?
|
||||
|
||||
|
They go in the same places they did on the old switch. Usually black is L.
It sounds like you only have 3 wires? Your replacement switch requires four. Check this page: http://www.ceiling-fans-n-more.com/c...and-repair.php |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The chain to operate my 3 speed fan broke off. I have no way of turning off the fan so I flipped the switch in my electrical box to the room. I have marked the position of the 4 wires and am trying to remove them from the switch, however, they appear to be sodered. I read in one article that I...
I am replacing a ceiling fan because the blades broke off the original in Hurricane Katrina. My fan is attached to the 30 foot ceiling by an extended pole. Is there anyway to replace the fan at the end of the pole instead of having to get to the ceiling box which will require scaffolding? Thanks...
I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...
Installed the old fan from the dining room in a Bedroom. During the install, I noticed the 3 speed FAN Switch housing was cracked and broken... Everything had always run smoothly. Bought a replacement switch at WalMart, with the same engravings, part numbers, etc. But the larger plastic...
View more questions Search
|
