Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is a 30 amp breaker + #10 wire good for this electric heater
[ 8 Answers ]
Hi, I am about to purchase and install this ceiling mounted electric heater: Fahrenheat Ceiling-Mount Automatic 5000 Watt Electric Heater, Model# FUH5-4 | Heaters | Northern Tool + Equipment It uses 240 Volts, 5000 Watts at 17,065 BTU/hr. It seems that it needs a 30 amp breaker and #10...
5.3 amp pump motor and 1500 watt wall heater on same 20 amp breaker
[ 9 Answers ]
I want to wire a bath room up flush toilet which is 5.3 amps motor into a curicuit with a 1500 watt wall heater ( 13 amps) on a 120 -20 amp breaker . The heater is never on and the toilet would only come on when some one uses down stairs bathroom.
What should I replace first: pump, filter, heater or replaster the pool
[ 4 Answers ]
New pool owner. I'm not concerned about price, and I realize a heater in Vegas is more of a luxury. What makes the most sense when it comes to being more energy or cost efficient? The pump leaks water. Believe it's an older model IntelliFlo. The filter is a DE. The pool has plaster coming...
Is a 60 amp breaker too much for a 40 gallon electric water heater?
[ 2 Answers ]
I had a tankless water heater installed and after a lot of trouble with it, it died. So, I want to go back to a regular tank water heater. Can I hook it up to the existing electric service to the tankless, which is really big: two pole 60 amp breaker with a 6 or 8 wire? I have the feeling that...
Pool Timer & pump electrical connection
[ 5 Answers ]
If one hooks up a pool pump to an intermatic timer incorrectly, can it blow the pump? I didn't hear anything. Is there a way to tell if the pump is bl;wn or just hooked up wrong? Thanks. View more questions Search
|