 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2001 honda civic won't start after replacing the ECU
2001 honda civic was shifting hard and eventually stopped going into drive. I plugged the diagnostic up to it and got fuel air mixture, ecu code and gear ratio code. I replaced that ECU and now it won't start.
|
||||
Check out some similar questions!
I have a 1994 honda civec vtec and the passenger floorboard got wet and shorted the ecu out... it fried it. After that I have no spark. I replaced the ecu and still have no spark. What should I do next? Im sure that when the ecu fried it probably fried the distributor or the main relay. What do...
My wife's Honda Civic wouldn't start this morning. It started with her keyless entry not working and then when she tried to start the car, there was nothing. When I put the key in the ignition and put it in the "on" position, the dash lights flicker about 10 times and then come on like normal. ...
My honda is still not getting fuel,even after replacing the main fuel/pump relay. I can't hear the fuel pump come on. It took several tries 2 days ago, now it won't get fuel at all. Should I replace the fuel pump? Do they act up a few times then die? I might add that when the car wouldn't start...
My alarm is very faint, my dome light will turn on when I open my door, and when I turn the key in the ignition, the dash lights all light on and there is a continuous clicking noise in the engine. What could be wrong?
I have a 2001 honda civic 1.7 dx manuel recently it was broke into and they stripped out were you place the key in the ignition. Well I replaced the ignition unit and connected all the wires to the ignition that I disconnected. Now the engine will rotate but not start does anyone know anyway I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
