Ask Experts Questions for FREE Help !
Ask
    shen321's Avatar
    shen321 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 19, 2010, 03:49 AM
    Choose a suitable section for a beam
    I need tochoose a suitable section for a beam. The details are below.
    I would appreciate it if anyone can help.
    Many Thanks

    A timber beam with a span of 4 m is carrying an inclusive UDL of 40 kN. The safe allowable bending stress is 6 N / mm2. Choose a suitable section for the beam.

Check out some similar questions!

A beam with 2in by 3 in cross section is supporting 1000 pounds what is the stress [ 2 Answers ]

A beam with 2in by 3 in cross section is supporting 1000 pounds what is the stress on the beam

High Beam/Low Beam on 99 Durango [ 4 Answers ]

My headlights will only work on high beams. My sister owned the Durango before and said she had to mess with the switch from time to time to get low beams to work then finally stopped working. Anyone ran into this problem? I think its in the steering column. I've checked fuses and headlights. ...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.