Ask Experts Questions for FREE Help !
Ask
    docdawg1's Avatar
    docdawg1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2010, 01:29 PM
    John deere lawn mower battery problem
    Have bought 3 new batteries. Mower drains them after a few uses. Have to jump start every time I use it. It is a model 145 john deer riding mower
    docdawg1's Avatar
    docdawg1 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Mar 18, 2010, 01:30 PM
    John deere lawn mower battery problem
    John deer 145 lawn mower drains batteries after a few uses
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #3

    Mar 18, 2010, 06:48 PM

    Check it when its running at the battery make sure its charging
    ,It should be putting out over 13 volts.If not check voltage at regulater.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere lawn mower [ 4 Answers ]

This about my john deere lawn mower I have had it only 2 yrs now it won't start any advice

John Deere GX95 Lawn Mower [ 18 Answers ]

How do I replace broken belt on GX95 Mower?

John deere stx 38 lawn mower [ 2 Answers ]

I own a john deere lawn mower stx 38 with kohler 12.5 hp 12.15 spec #, s/n 1914409078. Ihad it running this spring, but all a sudden I can't get it started. I do not have any spark at the plug. I have charged the battery, cleaned the connections, checked the safety switch under the seat, which...

John Deere Lawn mower [ 1 Answers ]

John deere lx 176 mower, I need the routing for the drive belt from the rear wheels to transmission

John deere riding mower battery charging [ 3 Answers ]

I have had this john deere 16 hp 42 inch riding mower for 8 years. The battery charging circuit has never worked. Although it runs for some time on an external charge, I would like to get it right. I pulled the stator yesterday and cleaned everything with a dremel and wire brush, to make sure that...

View more questions Search