Ask Experts Questions for FREE Help !
Ask
    mic815's Avatar
    mic815 Posts: 13, Reputation: 1
    New Member
     
    #1

    Mar 16, 2010, 04:14 PM
    To determine the size amp brkr. For a 5kw a/c unit do I just divide 238 (v.) by 5000
    To determine the size amp brkr. For a 5kw a/c unit do I just divide 238 (v.) by 5000
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Mar 16, 2010, 04:52 PM

    What does the rating plate say?

    Where are you getting the 5kW number from? A/C's are not typically rating in wattage.
    mic815's Avatar
    mic815 Posts: 13, Reputation: 1
    New Member
     
    #3

    Mar 16, 2010, 05:44 PM
    I'm referring to language in the recent past
    With heat pump and air handler/heater... when changing out old system which was not a heat pump and they said heat strip was only 5kw in new unit which brings me to the next question, how do you
    Tell a heat pump from a regular compressor aside from looking at thermostat and seeing emergency heat
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #4

    Mar 16, 2010, 06:42 PM

    Strip heat is NOT A/C. Not even close. Two completely different animals.

    A/C or heat pump condensers are the outside unit of a split system. Strip heat goes inside the air handler and is above and beyond all the other parts of the system.
    Meaning for example if the AH draws 2A @ 240v, and the condenser draws 20A @ 240v, 5000 watts of electric heat would draw an additional 21A @ 240v, but would be wired with the AH.
    Condensers are wired separately, but joined by a control wire.

    I don't know how to tell a heat pump just by looking at the unit. I would have to read the plate.
    mic815's Avatar
    mic815 Posts: 13, Reputation: 1
    New Member
     
    #5

    Mar 17, 2010, 06:59 AM

    Thank you for your expertise and just to confirm... to tell if the outside unit is a compressosr or heat pump, look at the spec. label?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How long will it take for 20% of the {\rm U}-238 atoms in a sample of {\rm U}-238 to [ 2 Answers ]

How long will it take for 20% of the {\rm U}-238 atoms in a sample of {\rm U}-238 to decay?

How to determine if intertherm unit for mobile home has heat unit? [ 2 Answers ]

Does intertherm ac model ASCB-030-BBBB have a heating unit. This unit does cool sufficiently for mobile home installation.

Used A/C unit & line size [ 3 Answers ]

I have a 2 ton unit (very old - The Smithsonian is asking for it!) and the compressor just shorted. The line is 1/4 inch. The technician that came out said that all newer units use 3/8 inch lines. He also said you could put a newer unit designed for a 3/8 inch line onto to the 1/4 inch line, but...

Must AC Unit & Forced Air Unit Be Same Size? [ 3 Answers ]

:confused:My forced air heat and air conditioning system components (1969 Coleman A/C & Gaffer Statler FAU) have exceeded their life expectancy by about double and for mostly efficiency reasons I'm looking to replace the units. One HVAC guy recommends upgrading from 4 ton to 5 ton (2300 sq. ft....

Compatibilities between awg wiring, breaker amp size, outlet amp size [ 4 Answers ]

Hi. Is there a resource out there, prefereably on the web, that outlines the compatibilities between awg wiring, the breaker amp size, outlet amp size, how many recepticles/outlets can be on x amp outlet, etc? For example, it would be nice to see something that shows: you can use a 20 amp...


View more questions Search