Ask Experts Questions for FREE Help !
Ask
    ohs!@*'s Avatar
    ohs!@* Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 14, 2010, 05:01 PM
    Colmenevecondgat red light flashing says my attic fan is not working??
    My furnace will not blow anything out, red light flashes @ where the theremostat wireing box on the furnace is. It says my attic fan is not working.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 15, 2010, 01:00 AM
    Yes you system has the Coleman makeup air system. I am going to post a sight for you to go to below. Sign in and post under Coleman. They can help since units of that type are usually in a mobile home.

    Index page
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier Furnace Problems - flashing red light [ 7 Answers ]

I have a high efficiency carrier furnace. When I came home yesterday I noticed that my house was a lot colder then it should be. The fan was blowing but no hot air. I checked the furnace and the LED red light was flashing - 3 quick then 1 long. On the back panel it said this indicated one of a...

Flashing red light on gibson furnace [ 2 Answers ]

My gibson furnace is not heating, when I looked inside, I saw a flashing red light and no flames. What could be the problem?

York heat pump flashing red light four times [ 1 Answers ]

York electric heat pump... red light on thermostat is flashing four times... continuously... Bought the house from another owner and he left no manuals, etc. What problem might I be having??

Electronic ignition red light flashing sequence [ 1 Answers ]

I am trying to find a manual on a Concord furnace. At this time the blower starts but the burners do not light and then the system shuts down until power is cut and then turned on again and the same thing occurs, the rde light flashes 3 times before complete shut down occurs. What does this mean...

Flashing red light code ? [ 10 Answers ]

OK I have seen the same question asked and followed the instructions, BUT I can't find the meaning of my code on the inside of my access panel. I have a Trane XE80 with a White-Rodgers 50a50-473 control panel, the heat cycles on and off every 20 30min. The flashing code is (I think) 14 ...

View more questions Search