Ask Experts Questions for FREE Help !
Ask
    benzman's Avatar
    benzman Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 12, 2010, 03:24 PM
    Why want my thermestat come on
    Fuse for thermestat was replaced by repairman went back out after a few days he recommended that we replace thermestat and I did wher is fuse for thermestat
    benzman's Avatar
    benzman Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Mar 12, 2010, 03:27 PM

    After repairman came out he told me that the fuse in thermestat was bad replaced it it went out after a few days than he said thermestat was bad replaced it the thermestat is still out wher is this fuse for the thermestat
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Mar 12, 2010, 04:13 PM
    Fuse usually located in furnace or air handler. That is the indoor unit. It could be on the circuit board or other locations in the unit. BE CAREFUL since the fuse has to be replaced with like same amp rate. The unit should be repaired to prevent further damage.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trying to install universal thermestat. [ 1 Answers ]

I'm trying to install a ritetemp thermastat and found the RH wire and W wire had a jumper wire between each other. The instuctions don't have a set up for this and I want to know if this OK for the correct installation. I am installing the new thermostat because my unit keeps icing up and shutting...

View more questions Search